R/C BOAT SPECIALIST
FOR ALL YOUR RACING NEEDS		  
  

 
 
 
  
 
 

 

CMDI PRODUCTS

 

 

Decades of Dedication

CMD Racing has dedicated decades of research and development to the advancement of R/C marine products. Our focus is to develop leading edge yet reliable equipment that is, not only race-ready, but also "win-ready", directly from our manufacturing facilities. As a result of our pain-staking hard work and years of relentless effort we were the first R/C Marine products manufacture to break the 100mph barrier in IMPBA. Since then, we have succeeded in officially exceeding 200 KPH (126 mph). Our accomplishments also include several National and World Championships. In our second year, 1987, our 67 Mongoose rigger was IMPBA US-1 National Champion and the Twin 67 Mongoose won the Top Gun Twin race at the IMPBA Internats that year. Since that time CMD (Andy Brown) riggers have won more major races and set more S.A.W. and Oval records than any other manufacture. Our hull roster begins with the Mongoose 1986-90, Eagle 1990-94, Jaguar 1994-95 (for Tidewater), Eagle SG 1996-2002, Eagle SGX 2002--.CMD Racing also delivers the Leading Edge Tuned Pipe Technology of Andy Brown with pipes for a growing number of applications. In the first year of production Andy Brown Tuned Pipes have broken several speed records and won many championships.Our expanding line of custom hardware is second to none in design and quality.

     
 

 

EAGLE SGX outriggers

in stock soon

 

Go to AB pipes section for the all the all new BAR STOCK pipes

 





CMDi Solid Billet Headers
New Headers from Andy Brown Performance. Solid billet headers are now available. They are available in 10 or 15 degrees.

.21 @ $38.95aus

[export $35.05aus]

.67 or .84 @ $46.95aus

[export $42.25aus]

.45 @ $42.95aus

[export $38.65aus]

.90 @ $49.95aus

[export $44.95aus]



CMDi Big Bore Pressure Fittings
CMDi Big Bore Pressure Fittings are now available. Made from 7075-T6 Aluminum with Stainless Steel nut. These fittings are light weight and strong and provide good pressure for any engine size.

$4.95aus [export $4.45aus]


CMDi Shaft Bushings
CMDi Shaft Bushings are back in stock. These Shaft Bushings are precision machined from solid billet. Available for 1/4" or 3/16" shafts.


1/4 $13.95aus [export $12.55aus]

3-1/6 $12.95aus [export $11.65aus]


CMDi Bullet Nosed Drive Dogs
3/16" x .365 Bullet Nosed Drive Dogs are now available from CMDi. These Drive Dogs are available in either Stainless Steel or 7075-T6 Aluminum.
$6.95aus [export $6.25aus]


CMDi Zenoah mount for Riggers
The CMDi Zenoah mount for Riggers is back in stock. These units are precision machined from 6061-T6 alloy. This mount will allow you to mount your Zenoah into a narrow 3.5" wide hull.
$89.95aus [export $80.95aus]



New AB Pipe Brackets
New pipes brackets to match the AB Billet pipes are now available. Lengths are 1.0" and 1.5". Other lengths and configurations will be available soon.
SMALL [21] ---$23.95aus [export $21.55aus]

LARGE--- [45 and up] $25.95aus [export $23.35aus]


CMDi Bullet nose Stainless Steel Drive dogs
Introducing new Bullet nose Stainless Steel Drive dogs from CMDi. They are .460" X 1/4" with two set screws. The .460" O.D. makes a pefect match to most 1/4" prop hubs. Other sizes coming soon.
3-1/6 $7.50aus [export $6.75aus]

1/4 $7.95aus [export $7.15aus]


CMDi rudder assemblies and blades are back in stock
We have added a wider range of blades too.

Blades sizes availible are as follows; 0.9" X 4.4", 1.0" X 4.4", 1.0" X 5.1", 1.0" X 5.6" 1.1" X 5.1", 1.1" X 5.3", 1.1 X 5.6", and 1.2" X 6.0". 1.2" X 6.0" w/ Dual pick-up.

CMDi blades are made from 7075 -T6 which has 90% greater yield (bending) strength than the 6061-T6 commonly used by other hardware manufactures. This allows us to make thinner blades.

7075-T6 is triple the cost of 6061 and is much tougher to machine resulting in a higher cost part, but the performance improvement well justifies the extra cost.

CMDi pivot and transom brackets are also lighter due to the use of stronger material.

0.9in x 4.4in assembly-- $94.95aus [export $85.45aus]

1.0in x 4.4in assembly-- $94.95aus [export $85.45aus]

1.0in x 5.1in assembly --$94.95aus [export $85.45aus]

1.1in x 5.3in assembly --$101.95aus [export $91.75aus]

1.2in x 6.0in assembly-- $101.95aus [export $91.75aus]

Dual pickup assembly-- $114.95aus [export $103.45aus]

1.0in x 5.1 long, assembly --$94.95aus [export $85.45aus]

1.1in x 5.6in extra long, assembly --$98.95aus [export $89.05aus]


CMDi Carburetor Arms designed with durability and convenience in mind.
Arm is drill and tapped for 2-56 ball link connectors. It uses 2 3mm set screws. Built with high tensile strength billet. Double filet design eliminates breakage. Fits all MAC and CMB Carburetors.


$14.95aus [export $13.45aus]

 

free counter
online slots

 

 

 
 

 

 

 

 


  

 
Privacy Policy